Product Detail:
The product complies with standard GB14048.2-2008 GB/T22387-2008
There is an electronic overcurrent release in the RCCB intelligent residual current operated circuit breaker. The rated current of the circuit breaker is adjustable according to the line load. The three-stage protection curve is adjustable and the RCCB can achieve hierarchical protection with subordinate circuit breakers. The electronic overcurrent release has high protection accuracy and is less affected by the ambient temperature and installation position. It is an upgraded product of the thermal magnetic overcurrent release. There are two types: economical RCCB and standard RCCB.
The smart moled case residual current operated circuit breaker is equipped with an RS485 serial interface which can set the protection characteristic parameters through the programmer. And the RCCB can meet the requirements of communication networking.
Normal Working Conditions:
Ambient temperature: -20℃~+60℃
Relative air humidity: When the monthly average minimum temperature of the wettest month does not exceed 25℃, the monthly average maximum relative temperature of the month does not exceed 90%. And the condensation on the surface of the product due to temperature changes should be taken into account.
Installation location: The altitude does not exceed 2000 meters, otherwise it needs to be used with derating.
Pollution degree: Level 3
Installation category: III
The power supply sine wave distortion is less than 5%.
Installation conditions: The external magnetic field of the installation site does not exceed 5 times the geomagnetic field in any direction. No explosive, no corrosive gas, no rain and snow invasion, dry, and ventilated.
The Main Technical Parameters
Rated working voltage Ue (V): AC400V three-phase four-wire
Rated operating frequency (Hz): 50Hz / 60Hz
Rated insulation voltage Ui(V): 1000V
Rated impulse withstand voltage Uimp(V): 6000V
Reclosing time (s): 20s-60s
Action characteristics: Class AC
Use category: Class A
Frame current : 100A, 250A,400A,630A,800A
| Series LDM9LZ – Smart RCCB Residual Current Operated Circuit Breaker | |||
| Image | Model No. | Remark | QTY/CTN |
 |
LDM9LZ-125/3S LED Digit Display | Electronically adjustable with 485 communication | 4 |
| LDM9LZ-250/3S LED Digit Display | 4 | ||
| LDM9LZ-400/3S LED Digit Display | 2 | ||
| LDM9LZ-630/3S LED Digit Display | 2 | ||
| LDM9LZ-125/3S LCD Display | 4 | ||
| LDM9LZ-250/3S LCD Display | 4 | ||
| LDM9LZ-400/3S LCD Display | 2 | ||
| LDM9LZ-630/3S LCD Display | 2 | ||
| LDM9LZ Copper Fittings 250A | Accessory | ||
| LDM9LZ Copper Fittings 400A | Accessory | ||
| LDM9LZ Copper Fittings 630A | Accessory | ||
| Products can be customized to suit your needs. | |||
1. Most of new products are guaranteed for 12 months from the date of delivery, some for 18 months;
2. All products sent for repair shall be guaranteed for 6 months after repair;
3. Paid repair service can be provided for products beyond the warranty period.
There Are Three Ways to Contact ELEMRO to Place Orders
1. You can proactively contact ELEMRO through social media apps such as WhatsApp, Skype, Viber, and Facebook:
2. You can fill in your requirements in the bottom right corner of the webpage, and we will contact you as soon as we receive the requirements;
3. You can also contact various ELEMRO offices for offline communication and cooperation. Click here for ELEMRO office information.