Top Quality Circuit Breaker 3p - ZGLEDUN Series LDM9L-(CM1) MCCB molded Case Circuit Breaker, RCCB Residual Current Residual Current operated Cicuit-breaker with Integral Overcurrent Protection RCBO – Elemro

Product Description:

Circuit breakers are classified into M type (Medium high breaking type) and H type (high breaking type) according to their rated limit short-circuit breaking capacity (Ieu). This molded case circuit breaker has the characteristics of small size, high breaking, short arcing, and anti-vibration.

This MCCB can be customized to suit your needs.

Normal Working Conditions

◆Ambient medium temperature: not higher than +40℃ (+45℃ for common products) and not lower than -5℃. The average value of 24h does not exceed +35℃ (+40℃ for common products )
◆ Installation location: The altitude does not exceed 2000m;
◆ Installation location: The relative humidity of the air does not exceed 50% when the highest temperature is +40℃. It can have a higher relative humidity at a lower temperature. For example, relative humidity 90% at 20℃. Special measures should be taken for suspected exposure occasionally due to temperature changes.
◆ Installation category:
Main circuit of the circuit breaker and the undervoltage release: Grade III
Auxiliary circuits and control circuits: Grade II
◆ The circuit breaker can withstand the influence of humid air, salt mist, oil mist, mold and nuclear radiation.
◆ The maximum inclination of the circuit breaker installation is ±22.5°
◆ The circuit breaker can work reliably under earthquake conditions (4g);
◆ The circuit breaker should be installed in a place where there is no danger of explosion, no conductive dust, no corrosion of metal and no damage to insulation.
◆The circuit breaker should be installed in a place where there is no rain or snow.

Classification of Circuit Breaker

• Type A: The N pole is not equipped with an overcurrent release ( Shunt Trip ). The N pole is always on, and it is not switched on/off together with the other three poles.
• Type B: The N pole is not equipped with an overcurrent release ( Shunt Trip ) and is switched on/off together with other three poles (N pole is closed first and then opened).
• Type C: The N pole is installed with an overcurrent release ( Shunt Trip ) , and is switched on/off together with the other three poles (the N pole is off first and then on).
• Type D: N pole is installed with an overcurrent release ( Shunt Trip ) . The N pole is always on, and it is not switched on/off together with other three poles.

Rated current (A) :

• LDML9-125: (10A), 16A, 20A, 25A, 32A, 40A, 50A, 63A, 80A, 100A, 125A
• LDM9L(CM1)-250: 100A, 125A, 140A, 160A, 180A, 200A, 225A, 250A
• LDM9L(CM1)-400 : 225A, 250A, 315A, 350A, 400A
• LDW9L(CM1)-630: 400A, 500A, 630A
• LDM9L(CM1)-800: 630A, 700A, 800A
[specification With ( ) is not recommended ]

Four Types of Wiring Method:
(1)Front-panel Wiring
(2)Back-panel Wiring
(3)Front-panel-inserted
(4)Back-panel-inserted

Two Types of Overcurrent Release (Shunt Trip):
(1)Thermal-electromagnetic (duplex) type
(2)Electromagnetic (instantaneous) type

Accessories of MCCB Molded Case Circuit Breaker : (1) with accessories and (2) without accessories.
There are internal accessories and external accessories.
Internal accessories include shunt trip, undervoltage release, auxiliary contact, and alarm .
External accessories include rotating handle operating mechanism, electric operating mechanism, interlocking structure, and wiring terminal blocks for auxiliary devices.

Series LDM9L（CM1) MCCB Molded Case Residual Current Residual Current operated Cicuit-breaker with Integral Overcurrent Protection
Image	Model No.	Poles	Unit	Quantity/Carton
	LDM9L-125M/3300	3P	PC	8
	LDM9L-250M/3300	3P	PC	8
	LDM9L-400M/3300	3P	PC	4
	LDM9L-630M/3300	3P	PC	2
	LDM9L-800M/3300	3P	PC	2
	LDM9L-125M/4300	4P	PC	8
	LDM9L-250M/4300	4P	PC	8
	LDM9L-400M/4300	4P	PC	2
	LDM9L-630M/4300	4P	PC	2
	LDM9L-800M/4300	4P	PC	2
Products can be customized to suit your needs.

1. Most of new products are guaranteed for 12 months from the date of delivery, some for 18 months;
2. All products sent for repair shall be guaranteed for 6 months after repair;
3. Paid repair service can be provided for products beyond the warranty period.

There Are Three Ways to Contact ELEMRO to Place  Orders

1. You can proactively contact ELEMRO through social media apps such as WhatsApp, Skype, Viber, and Facebook:

2. You can fill in your requirements in the bottom right corner of the webpage, and we will contact you as soon as we receive the requirements;
3. You can also contact various ELEMRO offices for offline communication and cooperation. Click here for ELEMRO office information.