Professional Design Circuit Breaker N Pole - ZGLEDUN Series LDM9L-(CM1) MCCB molded Case Circuit Breaker, RCCB Residual Current Residual Current operated Cicuit-breaker with Integral Overcurrent Protection RCBO – Elemro

Product Description:

Circuit breakers are classified into M type (Medium high breaking type) and H type (high breaking type) according to their rated limit short-circuit breaking capacity (Ieu). This molded case circuit breaker has the characteristics of small size, high breaking, short arcing, and anti-vibration.

This MCCB can be customized to suit your needs.

Normal Working Conditions

◆Ambient medium temperature: not higher than +40℃ (+45℃ for common products) and not lower than -5℃. The average value of 24h does not exceed +35℃ (+40℃ for common products )
◆ Installation location: The altitude does not exceed 2000m;
◆ Installation location: The relative humidity of the air does not exceed 50% when the highest temperature is +40℃. It can have a higher relative humidity at a lower temperature. For example, relative humidity 90% at 20℃. Special measures should be taken for suspected exposure occasionally due to temperature changes.
◆ Installation category:
Main circuit of the circuit breaker and the undervoltage release: Grade III
Auxiliary circuits and control circuits: Grade II
◆ The circuit breaker can withstand the influence of humid air, salt mist, oil mist, mold and nuclear radiation.
◆ The maximum inclination of the circuit breaker installation is ±22.5°
◆ The circuit breaker can work reliably under earthquake conditions (4g);
◆ The circuit breaker should be installed in a place where there is no danger of explosion, no conductive dust, no corrosion of metal and no damage to insulation.
◆The circuit breaker should be installed in a place where there is no rain or snow.

Classification of Circuit Breaker

• Type A: The N pole is not equipped with an overcurrent release ( Shunt Trip ). The N pole is always on, and it is not switched on/off together with the other three poles.
• Type B: The N pole is not equipped with an overcurrent release ( Shunt Trip ) and is switched on/off together with other three poles (N pole is closed first and then opened).
• Type C: The N pole is installed with an overcurrent release ( Shunt Trip ) , and is switched on/off together with the other three poles (the N pole is off first and then on).
• Type D: N pole is installed with an overcurrent release ( Shunt Trip ) . The N pole is always on, and it is not switched on/off together with other three poles.

Rated current (A) :

• LDML9-125: (10A), 16A, 20A, 25A, 32A, 40A, 50A, 63A, 80A, 100A, 125A
• LDM9L(CM1)-250: 100A, 125A, 140A, 160A, 180A, 200A, 225A, 250A
• LDM9L(CM1)-400 : 225A, 250A, 315A, 350A, 400A
• LDW9L(CM1)-630: 400A, 500A, 630A
• LDM9L(CM1)-800: 630A, 700A, 800A
[specification With ( ) is not recommended ]

Four Types of Wiring Method:
(1)Front-panel Wiring
(2)Back-panel Wiring
(3)Front-panel-inserted
(4)Back-panel-inserted

Two Types of Overcurrent Release (Shunt Trip):
(1)Thermal-electromagnetic (duplex) type
(2)Electromagnetic (instantaneous) type

Accessories of MCCB Molded Case Circuit Breaker : (1) with accessories and (2) without accessories.
There are internal accessories and external accessories.
Internal accessories include shunt trip, undervoltage release, auxiliary contact, and alarm .
External accessories include rotating handle operating mechanism, electric operating mechanism, interlocking structure, and wiring terminal blocks for auxiliary devices.

Series LDM9L（CM1) MCCB Molded Case Residual Current Residual Current operated Cicuit-breaker with Integral Overcurrent Protection
Image	Model No.	Poles	Unit	Quantity/Carton
	LDM9L-125M/3300	3P	PC	8
	LDM9L-250M/3300	3P	PC	8
	LDM9L-400M/3300	3P	PC	4
	LDM9L-630M/3300	3P	PC	2
	LDM9L-800M/3300	3P	PC	2
	LDM9L-125M/4300	4P	PC	8
	LDM9L-250M/4300	4P	PC	8
	LDM9L-400M/4300	4P	PC	2
	LDM9L-630M/4300	4P	PC	2
	LDM9L-800M/4300	4P	PC	2
Products can be customized to suit your needs.

1. Most of new products are guaranteed for 12 months from the date of delivery, some for 18 months;
2. All products sent for repair shall be guaranteed for 6 months after repair;
3. Paid repair service can be provided for products beyond the warranty period.

Headquarters in Chinese Mainland:

ELEMRO (XIAMEN) TECHNOLOGY COMPANY LIMITED

Address: RM308, No.1260 of Gangzhong Rd., Huli District, Xiamen City, 361000, Fujian Province

Tel: +86 592 5510092

E-mai: Sales@elemro.com

************************** ************************** ************************** ***************

HONGKONG Office：

Address: NO.47 WONG CHUK STREET, SHAM SHUI PO KOWLOON

E-mail: dony.tang@elemro.com

************************** ************************** ************************** ***************

Headquarters in Singapore :

ELEMRO Singapore PTE LTD

Address:  531A UPPER CROSS STREET #04-95 HONG LIM COMPLEX, SINGAPORE (051531)

E-mail: dony.tang@elemro.com

************************** ************************** ************************** ***************

Thailand Office:

Address: 364/1 Soi Chumchon Watbangkradi Samaedam Subdistrict Bangkhuntien District Bangkok 10150 Thailand

Mobile:  +66 62-6699222

E-mail: acareals@elemro.com

************************** ************************** ************************** ***************

Philippines Office: 

Address: RM201, Vivo Garden, MX5M+J56, Calooncan, Metro Manila

E-mail: dony.tang@elemro.com