OEM manufacturer Abb Supplier - SPD Surge Protective Devices T1 Level Graphite Core 10/350μs, Surge Protector ZGLEDUN Series LD-MD , Surge Arrester Lightning Protector – Elemro Detail:
LD-MD series primary surge protective device (SPD) is designed according to IEC and GB standards. It is applied to the first-level surge protection of the power supply system. The SPD uses a standard 35mm rail type installation method.
The LD-MD series T1 level surge protector has a high lightning current discharge capacity. The maximum impulse current of a single module can reach 50KA (10/350μs), which can prevent various surges including direct lightning. It is applied to be the first-level surge protection device in power supply equipment systems in the areas of higher risk of lightning strikes. It can be combined for single-phase/three-phase power supply lines.
Application Sites:
◆General power distribution panel in the building
◆Overhead input distribution box in the building
◆Outdoor power distribution cabinet/distribution box
The Main Technical Parameters | ||||
Model | LD-MD-A12.5 | LD-MD-A15 | LD-MD-A25 | LD-MD-A50 |
SPD Port | 1 Port | 1 Port | 1 Port | 1 Port |
SPD Type | Voltage limiting type /Voltage switching type | Voltage limiting type /Voltage switching type | Voltage switching type | Voltage switching type |
Testing | I | I | I | I |
Rated Voltage Un | 110V/220V AC50-60Hz | 110V/220V AC50-60Hz | 110V/220V AC50-60Hz | 110V/220V AC50-60Hz |
Maximum Continuous Operating Voltage Uc (AC) | 275V,320V,385V,420V,440V | |||
Insulation resistance | >100 MΩ | >100 MΩ | >100 MΩ | >100 MΩ |
Impulse Discharge Current limp (10/350 μs) | 12.5KA | 15KA | 25KA | 50KA |
Protection Level Up (1.2/50 μs) | 2.2 KV | 2.2 KV | 2.5 KV | 2.8 KV |
Response Time tA | ≤100ns | ≤100ns | ≤100ns | ≤100ns |
Dimension (mm) | 144x90x66 | 144x90x66 | 144x90x66 | 144x90x66 |
Installation Wire Cross-sectional Area mm² | 6-25mm2 | |||
Installation | 35mm Standard Rail (EN50022/DIN46277-3) | |||
Working Environment Temperature ℃ | -40ºC to 85ºC | |||
Shell Material | Plastic complied with UL94V-0 | |||
Protection Level | IP20 |
SPD Surge Protector 10-350 Type , T1 Level Graphite Core | ||||
Image | Model Number | Rated Current | Quantity Per Carton | Remark |
LD-MD-12.5KA(10-350) 4P | 5~12.5KA | 36 | 18mm Samll Shell | |
LD-MD-15KA(10-350) 4P | 5~15KA | 18 | 36mm | |
LD-MD-25KA(10-350) 4P | 10~25KA | 18 | 36mm | |
LD-MD-50KA(10-350) 4P | 25~50KA | 18 | 36mm |
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for OEM manufacturer Abb Supplier - SPD Surge Protective Devices T1 Level Graphite Core 10/350μs, Surge Protector ZGLEDUN Series LD-MD , Surge Arrester Lightning Protector – Elemro , The product will supply to all over the world, such as: Mecca, Chile, Moscow, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we provide, effective and satisfying consultation service is supplied by our professional after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So you should make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We've been confident that we have been going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We're searching forward for your inquiries.
1. Most of new products are guaranteed for 12 months from the date of delivery, some for 18 months;
2. All products sent for repair shall be guaranteed for 6 months after repair;
3. Paid repair service can be provided for products beyond the warranty period.
There Are Three Ways to Contact ELEMRO to Place Orders
1. You can proactively contact ELEMRO through social media apps such as WhatsApp, Skype, Viber, and Facebook:
2. You can fill in your requirements in the bottom right corner of the webpage, and we will contact you as soon as we receive the requirements;
3. You can also contact various ELEMRO offices for offline communication and cooperation. Click here for ELEMRO office information.
By Gemma from Provence - 2017.08.18 18:38
Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
By Eartha from California - 2018.12.05 13:53