Manufacturer of Circuit Breaker Auxiliary Contact - ZGLEDUN LDM9(CM1-Type) MCCB molded Case Circuit Breaker – Elemro

Product Standards:

This circuit breaker product implements the following standards:
◆ General rules of IEC60947-1 and GB/T14048.1
◆ IEC60947-2 and GB/T14048.2 Low voltage circuit breaker
◆ IEC60947-4 and GB/T14048.4 Contactors and motor starters
◆ IEC60947-5.1 and GB/T14048.5 Electromechanical control circuit appliances

Normal Working Conditions

◆Ambient medium temperature: not higher than +40℃ (+45℃ for common products) and not lower than -5℃. The average value of 24h does not exceed +35℃ (+40℃ for common products )
◆ Installation location: The altitude does not exceed 2000m;
◆ Installation location: The relative humidity of the air does not exceed 50% when the highest temperature is +40℃. It can have a higher relative humidity at a lower temperature. For example, relative humidity 90% at 20℃. Special measures should be taken for suspected exposure occasionally due to temperature changes.
◆ Installation category:
Main circuit of the circuit breaker and the undervoltage release: Grade III
Auxiliary circuits and control circuits: Grade II
◆ The circuit breaker can withstand the influence of humid air, salt mist, oil mist, mold and nuclear radiation.
◆ The maximum inclination of the circuit breaker installation is ±22.5°
◆ The circuit breaker can work reliably under earthquake conditions (4g);
◆ The circuit breaker should be installed in a place where there is no danger of explosion, no conductive dust, no corrosion of metal and no damage to insulation.
◆The circuit breaker should be installed in a place where there is no rain or snow.

Classification of Circuit Breaker

• Type A: The N pole is not equipped with an overcurrent release ( Shunt Trip ). The N pole is always on, and it is not switched on/off together with the other three poles.
• Type B: The N pole is not equipped with an overcurrent release ( Shunt Trip ) and is switched on/off together with other three poles (N pole is closed first and then opened).
• Type C: The N pole is installed with an overcurrent release ( Shunt Trip ) , and is switched on/off together with the other three poles (the N pole is off first and then on).
• Type D: N pole is installed with an overcurrent release ( Shunt Trip ) . The N pole is always on, and it is not switched on/off together with other three poles.

Rated current (A) :
• LDM9-63: (6A), 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A (6A without overload protection)
• LDM9-125: (10A), 16A, 20A, 25A, 32A, 40A, 50A, 63A, 80A, 100A, 125A
• LDM9-250: 100A, 125A, 140A, 160A, 180A, 200A, 225A, 250A
• LDM9-40 : 225A, 250A, 315A, 350A, 400A
• LDW9-630: 400A, 500A, 630A
• LDM9-800: 630A, 700A, 800A
[specification With ( ) is not recommended ]

Four Types of Wiring Method:
(1)Front-panel Wiring
(2)Back-panel Wiring
(3)Front-panel-inserted
(4)Back-panel-inserted

Two Types of Overcurrent Release (Shunt Trip):
(1)Thermal-electromagnetic (duplex) type
(2)Electromagnetic (instantaneous) type

Accessories of MCCB Molded Case Circuit Breaker : (1) with accessories and (2) without accessories.
There are internal accessories and external accessories.
Internal accessories include shunt trip, undervoltage release, auxiliary contact, and alarm .
External accessories include rotating handle operating mechanism, electric operating mechanism, interlocking structure, and wiring terminal blocks for auxiliary devices.

Series LDM9（CM1) MCCB Molded Case Circuit Breaker
Image	Model No.	Poles	Unit	Quantity/Carton
	LDM9-63/3300	3P	PC	16
	LDM9-125/3300	3P	PC	16
	LDM9-250/3300	3P	PC	12
	LDM9-250/3300	3P	PC	12
	LDM9-400/3300	3P	PC	4
	LDM9-630/3300	3P	PC	2
	LDM9-800/3300	3P	PC	2
	LDM9-1250/3300	3P	PC	1
	LDM9-63/4300	4P	PC	16
	LDM9-125/4300	4P	PC	16
	LDM9-250/4300	4P	PC	12
	LDM9-400/4300	4P	PC	4
	LDM9-630/4300	4P	PC	2
	LDM9-800/4300	4P	PC	2
	LDM9-1250/4300	4P	PC	1
Products can be customized to suit your needs.

1. Most of new products are guaranteed for 12 months from the date of delivery, some for 18 months;
2. All products sent for repair shall be guaranteed for 6 months after repair;
3. Paid repair service can be provided for products beyond the warranty period.

Headquarters in Chinese Mainland:

ELEMRO (XIAMEN) TECHNOLOGY COMPANY LIMITED

Address: RM308, No.1260 of Gangzhong Rd., Huli District, Xiamen City, 361000, Fujian Province

Tel: +86 592 5510092

E-mai: Sales@elemro.com

************************** ************************** ************************** ***************

HONGKONG Office：

Address: NO.47 WONG CHUK STREET, SHAM SHUI PO KOWLOON

E-mail: dony.tang@elemro.com

************************** ************************** ************************** ***************

Headquarters in Singapore :

ELEMRO Singapore PTE LTD

Address:  531A UPPER CROSS STREET #04-95 HONG LIM COMPLEX, SINGAPORE (051531)

E-mail: dony.tang@elemro.com

************************** ************************** ************************** ***************

Thailand Office:

Address: 364/1 Soi Chumchon Watbangkradi Samaedam Subdistrict Bangkhuntien District Bangkok 10150 Thailand

Mobile:  +66 62-6699222

E-mail: acareals@elemro.com

************************** ************************** ************************** ***************

Philippines Office: 

Address: RM201, Vivo Garden, MX5M+J56, Calooncan, Metro Manila

E-mail: dony.tang@elemro.com